Page 47 MEAN WELL LED DRIVER CATALOG

series 75~100W

Features
• Constant voltage+constant current modes • Multiple models for choice:
• Universal AC input (100 to 305VAC) / Full range Blank-Type: IP67 rated. Cable for I/O connection(For harsh environment)
• High efficiency up to 91% A-Type: IP65 rated. Io and Vo adjustable through built-in
• No load / Standby power consumption <0.5W potentiometer
• Meet 6KV surge immunity level (IEC61000-4-5) B-Type: IP67 rated. 3 in 1 dimming function (0~10Vdc, 10V PWM
• Class 2 power unit (ELG-75/100 only) signal and resistance)
• Type HL LED Driver for use in Class I, Division 2 hazardous AB-Type: IP65 rated. Io adjustable through built-in potentiometer
location luminaires & 3 in 1 dimming function.
• Suitable for dry / damp / wet locations with IP67 D2-Type: IP67 rated. Smart timer dimming function*, contact
• Suitable for outdoor LED lighting applications MEAN WELL for details
•Protections: DA-Type: IP67 rated. DALI control technology
• 5 years warranty
Short circuit / Over current / Over voltage / Over temp.

ACN ELG-75 ELG-100
INPUT
ACL
A
ACL Blank/A
INPUT ACN
A A A A A A A A A A A A A A A A A A A A
(3Y Models)
F FG
OUTPUT Vo-
(Non-Dimming
Models) Vo+ B/AB/D2/DA
DIM- /DA
OUTPUT DIM+/DA
(Dimming
Vo+
Models)
Vo-
AC input voltage range 100~305VAC ; 142~431VDC
AC inrush current (max.) Cold start, 50A at 230VAC Cold start, 60A at 230VAC
DC adjustment range ±10% rated output voltage (A-Type only)
Current adjustment range 50%~100% via potentiometer (A-Type only)
Over current protection 95%~108% constant current limiting, auto-recovery
Over voltage protection 110%~140% rated output voltage
Over temp. protection Shut down o/p voltage, re-power on to recover
Setup, rise, hold up time 500ms, 100ms, 10ms at full load and 230VAC
Withstand voltage I/P-O/P: 3.75kVAC I/P-FG: 2kVAC O/P-FG: 1.5kVAC
O
Tcase= -40~+90 C (refer to "OUTPUT LOAD vs
Working temperature Tcase= -40~+85 C
O
TEMPERATURE")
UL8750, IEC/BS EN/AS/NZ61347-1,-2-13, BS EN62384, GB19510.1, GB19510.14, EAC TP TC 004,
Safety standards
BIS IS15885(refer to spec for models), KC61347-1, KC61347-2-13, IEC 62386(DA type only)
BS EN55015, BS EN61000-3-2 class C, BS EN61000-3-3, BS EN61000-4-2,3,4,5,6,8,11, BS EN61547, GB17743,
EMC standards
GB17625.1, EAC TP TC 020, KC KN15, KN61547
Connection Please refer to page 50
Dimension (LxWxH) (mm) 180x 63x 35.5 199x 63x 35.5
0-10VDC 0-10VDC
(B-Type) (DA-Type) (B-Type) (DA-Type)
ELG-75 Series ELG-100 Series
Model No. Output Tol. R&N Effi. Model No. Output Tol. R&N Effi.
ELG-75-12 A - 12V, 0~5A ±3.0% 150mV 85% ELG-100-24 A - 24V, 0~4A ±3% 200mV 88%
ELG-75-24 A - 24V, 0~3.15A ±3.0% 200mV 88% ELG-100-36 A - 36V, 0~2.66A ±2.5% 250mV 89%
ELG-75-36 A - 36V, 0~2.1A ±2.5% 250mV 89% ELG-100-42 A - 42V, 0~2.28A ±2.5% 250mV 90%
ELG-75-42 A - 42V, 0~1.8A ±2.5% 250mV 90% ELG-100-48 A - 48V, 0~2A ±2% 300mV 90%
ELG-75-48 A - 48V, 0~1.6A ±2.0% 250mV 90% ELG-100-54 A - 54V, 0~1.78A ±2% 350mV 91%
= Blank, A, B, AB, D2 or DA ; = Blank, 3Y = Blank, A, B, AB, D2 or DA ; = Blank, 3Y
= Blank, 2-wire input for standard mode ; = 3Y, 3-wire input for standard mode.
*MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level.

44