Page 38 MEAN WELL LED DRIVER CATALOG

series 25~6~60W0WWW0

Features
• Constant current mode output • Multiple models for choice:
• KNX protocol Blank-Type: KNX and push dimming, with standby power
• Multiple-stage output current level selectable by DIP switch consumpion<0.5W
• support emergency lighting(EL) AUX-Type: KNX and push dimming, with standby power
• Integrated constant light output consumpion<1.2W and Auxiliary DC outpt
• Integrated KNX push button interface • Protections: Short circuit / Over voltage / Over temp.
• synchronization up to 10units • 3 years warranty
LCM-25KN LCM-40KN LCM-60KN

INPUT

OUTPUT

AC input voltage range 180 ~ 277VAC; 220 ~ 417VDC 180 ~ 295VAC; 220 ~ 417VDC
AC inrush current (Typ.) COLD START, 20A at 230VAC; Per NEMA 410
Short circuit protection Constant current limiting, recovers automatically after fault condition is removed
Over voltage protection --- 110 ~ 130V 105 ~ 125V
Over temperature protection Shutdown o/p voltage,re-power on to recover
Setup time 500ms / 230VAC
Total harmonic distortion THD< 20%
Withstand voltage I/P-O/P:3.75KVAC
Tcase= -30~+85˫(Please refer to
Working temperature “OUTPUT LOAD vs TEMPERATURE” Tcase=-30~+90˫(Please refer to “ OUTPUT LOAD vs TEMPERATURE”
section)
section)
CSA C22.2 No.250.13-12(LCM-25KN only); ENEC BS EN61347-1, BS EN61347-2-13, BS EN62384
Safety standards
independent, GB19510.14,GB19510.1, EAC TP TC 004 approved
KNX standards Certified protocol
BS EN55015, BS EN61000-3-2 Class C(@load͘40%) ; BS EN61000-3-3; GB17625.1,GB17743,
EMC standards BS EN61000-4-2,3,4,5,6,8,11, BS EN61547, light industry level(surge immunity Line-Line 2KV),
EAC TP TC 020
Dimension (LxWxH)(mm) 105x 68x 23 123.5x 81.5x 23
LCM-25KN Series
DIP Switch
Output Io Tol. Io Ripple Effi.
1 2 3 4 5 6
350mA, 6~54V ----- ----- ----- ----- ----- -----
500mA, 6~50V ON ----- ----- ----- ----- -----
600mA, 6~42V 5% ON ON ----- ----- ----- -----
700mA, 6~36V (Factory setting) ±5% (max.) 86% ON ON ON ----- ----- ON
900mA, 6~28V ON ON ON ON ----- ON
1050mA, 6~24V ON ON ON ON ON ON
LCM-40KN Series
DIP Switch
Output Io Tol. Io Ripple Effi.
1 2 3 4 5 6
350mA, 2~100V ----- ----- ----- ----- ----- -----
500mA, 2~80V ON ----- ----- ----- ----- -----
600mA, 2~67V ±5% 5% 90% ON ON ----- ----- ----- -----
700mA, 2~57V (Factory setting) (max.) ON ON ON ----- ----- ON
900mA, 2~45V ON ON ON ON ----- ON
1050mA, 2~40V ON ON ON ON ON ON
LCM-60KN Series
DIP Switch
Output Io Tol. Io Ripple Effi.
1 2 3 4 5 6
500mA, 2~90V ----- ----- ----- ----- ----- -----
600mA, 2~90V ON ----- ----- ----- ----- -----
700mA, 2~86V (Factory setting) ±5% 5% 91% ON ON ----- ----- ----- -----
900mA, 2~67V (max.) ON ON ON ----- ----- ON
1050mA, 2~57V ON ON ON ON ----- ON
1400mA, 2~42V ON ON ON ON ON ON
35