Page 39 MEAN WELL LED DRIVER CATALOG

series 25~65W

Features
• Constant voltage PWM style output mode • Isolation class II, no F.G.
• IDLV-25/45: 90~295VAC input • Built-in 2 in 1 dimming function (0~10VDC or PWM signal)
IDLV-65: 180~295VAC input only • Built-in 12V/50mA auxiliary output (A-Type)
• High efficiency up to 90% • Suitable for indoor LED strip lighting
• No load power consumption <0.5W (Blank-Type) • Protection: Short circuit / Over current
• Fully isolated plastic case with IP20 level • 3 years warranty

IDLV-25(A) IDLV-45(A) IDLV-65(A)

INPUT

OUTPUT
(Blank-Type)

OUTPUT
(A-Type)
AC input voltage range 90 ~ 295VAC ; 127 ~ 417VDC 180 ~ 295VAC; 254 ~ 417VDC
AC inrush current (max.) Cold start, 30A at 230VAC
Setup time 500ms / 230AVC
PWM dimming signal 10V PWM signal, frequency range 300Hz~3kHz
Total harmonic distortion THD<20%
Short circuit protection Shut down o/p voltage, repower on to recover
Withstand voltage I/P-O/P: 3.75KVAC
o
Working temperature Tcase= -20~+90 C Tcase= -20~+85 C (refer to "OUTPUT LOAD vs TEMPERATURE")
o
UL8750, ENEC BS EN/AS/NZS61347-1, BS EN/AS/NZS61347-2-13, BS EN62384, GB19510.14,
Safety standards
GB19510.1,EAC TP TC 004, BIS IS15885(for 12V,24V,48V only) approved
BS EN55015, BS EN61000-3-2 Class C, BS EN61000-3-3, BS EN61000-4-2,3,4,5,6,8,11, BS EN61547,
EMC standards
GB17743, GB17625.1, EAC TP TC 020
Connection (Input/Output) 4+4P push-in terminal block for Blank-Type, 4+6P for A-Type
Dimension (LxWxH) mm 110 x 75 x 22 120 x 75 x 25 130 x 75 x 25
(for 12V,24V,48V only) (for 12V,24V,48V only)
IDLV-25/25A Series IDLV-65/65A Series
Model No. Output Tol. Effi. Model No. Output Tol. Effi.
IDLV-25 -12 12V, 0~1.8A ±10% 80% IDLV-65 -12 12V, 0~4.2A ±10% 85%
IDLV-25 -24 24V, 0~1.05A ±10% 81% IDLV-65 -24 24V, 0~2.4A ±10% 87%
IDLV-25 -36 36V, 0~0.7A ±10% 82% IDLV-65 -36 36V, 0~1.8A ±10% 88%
IDLV-25 -48 48V, 0~0.52A ±10% 83% IDLV-65 -48 48V, 0~1.35A ±10% 89%
IDLV-25 -60 60V, 0~0.42A ±10% 84% IDLV-65 -60 60V, 0~1.08A ±10% 90%
= Blank/A; Blank: without auxiliary output, A: with auxiliary function = Blank/A; Blank: without auxiliary output, A: with auxiliary function
(for 12V,24V,48V only) IDL / IDP / ODL Series Difference
IDLV-45/45A Series
Series Type AC Input Range IP Output Mode
Model No. Output Tol. Effi.
IDLV-45 -12 12V, 0~3A ±10% 84% IDLC Plastic case IDLC/IDPC/
IDLV-45 -24 24V, 0~1.88A ±10% 86% IDLV with T.B. ODLC:
90~295VAC IP20 C.C. mode
IDLV-45 -36 36V, 0~1.25A ±10% 88% IDPC
PCB Type
IDLV-45 -48 48V, 0~0.94A ±10% 88% IDPV
IDLV/IDPV/
IDLV-45 -60 60V, 0~0.75A ±10% 90% ODLC Plastic case ODLV:
180~295VAC IP67 C.V. mode
= Blank/A; Blank: without auxiliary output, A: with auxiliary function ODLV with lead wire
36