Page 14 MEAN WELL LED DRIVER CATALOG

series 60~150W

Features
• Constant voltage mode • Type HL LED Driver for use in Class I, Division 2 hazardous
• LPV-60/100: 90~264VAC input location luminaires (LPVL-150 only)
LPV-150: 180~305VAC input only • Economic, high reliability
LPVL-150: 90~132VAC input only • Suitable for LED-based decorative/architectural lighting,
• Withstand 300VAC surge input for 5 seconds (LPV-60/100) LED stage, theater lighting, and LED electronic displays
• Fully encapsulated with IP67 level • Protections: Short circuit / Overload / Over voltage /
• Isolation class II, no F.G. Over temperature (LPV-150, LPVL-150 only)
• Class 2 power unit / Pass LPS (LPV-60-12/15/24/36/48 only) • 2 years warranty

LPV-150
LPV-60 LPV-100 LPVL-150

INPUT
LPV-60/100 LPV/LPVL-150

OUTPUT
LPV-60/100 LPV/LPVL-150

LPV-150: 180~305VAC; 254~431VDC
AC input voltage range 90~264VAC; 127~370VDC
LPVL-150: 90~132VAC
LPV-150: Cold start, 60A at 230VAC
AC inrush current (max.) Cold start, 60A at 230VAC Cold start, 75A at 230VAC
LPVL-150: Cold start, 75A at 115VAC
Overload protection 110%~150% hiccup mode, auto-recovery
Over voltage protection 115%~135% rated output voltage
Withstand voltage I/P-O/P: 3kVAC
O
O
O
Working temperature -30~+70 C -25~+70 C -25~+65 C
Vibration 10~500Hz, 2G 10 minutes /1 cycle, period for 60 minutes each along X, Y, Z axes
UL879 (except for LPV-60-5), UL1310
UL8750, UL879, EAC TP TC 004 approved;
Safety standards (except for LPV-60-5), IEC62368-1, IEC62368-1
EAC TP TC 004 approved
BS EN55032 class B, BS EN61000-3-2 class A, BS EN61000-3-3, BS EN61000-4-2,3,4,5,6,8,11, EAC TP
EMC standards
TC 020 FCC part 15 for LPVL-150 only, BS EN55024
Input UL rated, 18AWGx2C (60cm) UL rated, 18AWGx2C (30cm) UL rated, SJTW 18AWGx2C (30cm)
Connection
Output UL rated, 16AWGx2C (60cm) UL rated, 14AWGx2C (30cm) UL rated, SJTW 14AWGx2C (30cm)
Dimension (LxWxH)(mm) 162.5x 42.5x 32 190x 52x 37 191x 63x 37.5
LPV-60 Series (for 12V, 12V Only) (for 48V only) (for 12~36V) Model No. Output Tol. R&N Effi.
Model No. Output Tol. R&N Effi. LPV-100-24 24V, 0~4.2A ±5% 150mV 88%
LPV-60-5 5V, 0~8A ±8% 80mV 76% LPV-100-36 36V, 0~2.8A ±5% 150mV 88%
LPV-100-48 48V, 0~2.1A ±5% 150mV 89%
LPV-60-12 12V, 0~5A ±5% 120mV 83%
LPV-60-15 15V, 0~4A ±5% 120mV 83%
LPV/LPVL-150 Series
LPV-60-24 24V, 0~2.5A ±5% 150mV 86% (for LPV-150-12, 24 Only) (LPVL-150 only) (LPV-150) (LPVL-150)
Model No. Output Tol. R&N Effi.
LPV-60-36 36V, 0~1.67A ±5% 150mV 86%
LPV -150-12 12V, 0~10A ±5% 200mV 87%
LPV-60-48 48V, 0~1.25A ±5% 150mV 86%
LPV-150-15 15V, 0~8A ±5% 200mV 88%
LPV-100 Series
(for 12V, 12V Only) LPV -150-24 24V, 0~6.3A ±5% 200mV 89%
Model No. Output Tol. R&N Effi.
LPV-150-36 36V, 0~4.2A ±5% 200mV 89%
LPV-100-5 5V, 0~12A ±8% 80mV 80%
LPV-150-48 48V, 0~3.2A ±5% 200mV 90%
LPV-100-12 12V, 0~8.5A ±5% 120mV 85%
=Blank, L ;
LPV-100-15 15V, 0~6.7A ±5% 120mV 87% Blank: AC input range 180~305VAC, L: AC input range 90~132VAC
Note: These products are not intended for lighting applications in the EU.( In the EU NPF/LPF/XLG series are recommended)
11