Page 22 MEAN WELL LED DRIVER CATALOG

series 40~90W

Features
• Constant voltage PWM style output mode • Built-in 3 in 1 dimming function
• Universal AC input (90 to 305VAC) / Full range (0~10VDC, PWM signal or resistance)
• High efficiency up to 90.5% • Built-in DALI/DALI-2(for PWM-60/90)/IOT/Bluetooth mesh
• No load power consumption <0.5W interface (except for PWM-40)
• Fully isolated plastic case with IP67 level • IP67 Suitable for dry, damp, and wet location
• Isolation class II, no F.G. • Suitable for LED strip lighting
• Class 2 power unit (except for PWM-90-12 & PWM-120) • Protections:
• Type HL LED Driver for use in Class I, Division 2 Short circuit / Overload / Over voltage / Over temp.
hazardous location luminaires (except for PWM-90) • 5 years warranty
PWM-60(DA/DA2/IOT) PWM-90
PWM-40
PWM-60-KN PWM-90(DA/DA2)
INPUT
ACN
ACL
OUTPUT OUTPUT
(PWM-40/60) (PWM-90/120)-9
(PWM
DIM+ DIM+/DA+
DIM- DIM- /DA-
Vo- Vo-
Vo+ Vo+
AC input voltage range 90~305VAC; 127~431VDC
AC inrush current (max.) Cold start, 50A at 230VAC Cold start, 60A at 230VAC
Overload protection 108%~130% hiccup mode, auto-recovery
Over voltage protection 113%~142% rated output voltage (116%~142% rated output voltage for PWM-60-KN )
Over temp. protection Shut down o/p voltage, re-power on to recover
Setup time 500ms / 115VAC or 230VAC
Total harmonic distortion THD<20%
PWM output frequency 1.47kHz (200~4000Hz user changable via ETS for PWM-60-KN)
Withstand voltage I/P-O/P: 3.75kVAC
o
o
Tcase= -40~+85 C(-35~+85 C for PWM-60-KN) (refer to "OUTPUT
o
Working temperature Tcase= -40~+90 C
LOAD vs TEMPERATURE")
UL8750(except for DA-Type & PWM-60-KN), UL879( PWM-40/60-12/24 only), CSA C22.2 No.250.13-12
(except for PWM-60-KN); ENEC BS EN61347-1,BS EN61347-2-13 independent,BS EN62384, IP67 (except
Safety standards for PWM-60-KN),BIS IS 15885 (for 12,24,48, Blank Type only), EAC TP TC 004, GB19510.1,GB19510.14
approved; Design refer to BS EN60335-1(except for PWM-60-KN),According to BS EN61347-2-13 appendix
J suitable for emergency installations(except PWM-40)
BS EN55015, BS EN61000-3-2 Class C (@load͘60%) ; BS EN61000-3-3,GB17743 and GB17625.1, EAC TP TC
EMC standards
020, BS EN61000-4-2,3,4,5,6,8,11; BS EN61547, light industry level (surge immunity Line-Line 2KV)
Input UL rated, SJTW 18AWGx2C (30cm)
PWM-60(DA): UL2464 18AWG x2C
UL2464 18AWG x2C
Connection (30cm)+22AWG x2C (30cm) SJTW 16AWGx2C (30cm)+
Output (30cm)+
PWM-60-KN: UL2464 18AWG x2C UL2464 18AWGx2C (30cm)
22AWG x2C (30cm)
(30cm)+20AWG x2C (35cm)
Dimension (LxWxH) (mm) 150x 53x 35 150x 53x 35 171x 63x 37.5
0-10VDC
0-10VDC
PWM-40 Series (for 12V,24V) PWM-60-KN Series
Model No. Output Tol. Effi. Model No. Output Tol. Effi.
PWM-40-12 12V, 0~3.34A ±4% 86.0% PWM-60-12 12V, 0~5A ±4% 86.0%
PWM-40-24 24V, 0~1.67A ±3% 89.0%
PWM-60-24 24V, 0~2.5A ±3% 89.0%
PWM-40-36 36V, 0~1.12A ±2% 90.0%
= KN, KNBST; KN: KNX control technology
PWM-40-48 48V, 0~0.84A ±1% 90.0% KNBST: KNX control technology with BST14 connector
0-10VDC 0-10VDC
(DA2 Type
(DA2
(DA2-Type )Type (for DA2-Type only) (for DA-Type only) (DA2-Type ) (for DA2-Type only) (for DA-Type only)
PWM-60 Series E320521 Type HL PWM-90 Series
(for 12/24/48 Blank-Type) (except for DA-Type) (12,24,48 Blank-Type) (for DA2 and Blank Type) (except for 36V)
Model No. Output Tol. Effi. Model No. Output Tol. Effi.
PWM-60-12 12V, 0~5A ±4% 86.0% PWM-90-12 12V, 0~7.5A ±4% 88.0%
PWM-60-24 24V, 0~2.5A ±3% 89.0% PWM-90-24 24V, 0~3.75A ±3% 90.5%
PWM-60-36 36V, 0~1.67A ±2% 90.0% PWM-90-36 36V, 0~2.5A ±2% 90.5%
PWM-60-48 48V, 0~1.25A ±1% 90.0% PWM-90-48 48V, 0~1.88A ±1% 90.5%
= Blank, DA, IoT; Blank: with 3 in 1 dimming function , DA: with DALI/Bluetooth mesh function (12V/24V only)
19